GB/T 35467-2017 《湿铺防水卷材》E类指标要求
GB 55030-2022 《建筑与市政防水通用规范》
Executive standard
GB/T 35467-2017 Wet installed waterproof sheets, specifications of type E
GB 55030-2022 General code for waterproofing of building and municipal engineering
产品中心
PRODUCTS
+
GB/T 35467-2017 《湿铺防水卷材》E类指标要求
GB 55030-2022 《建筑与市政防水通用规范》
Executive standard
GB/T 35467-2017 Wet installed waterproof sheets, specifications of type E
GB 55030-2022 General code for waterproofing of building and municipal engineering
本产品是一种由特制的高密度聚乙烯交叉层压强力薄膜与高聚物自粘橡胶沥青经特殊工艺复合而制成的,上表面覆高延伸高分子膜或可剥离的涂硅隔离膜,下表面覆可剥离的涂硅隔离膜所制成的可以卷曲的片状自粘防水材料。
The product is a kind of rapid reaction self-adhesive membrane waterproof materials using high density polyethylene (HDPE) strong cross-film composited with polymer modified bitumen, with the upper surface covered by high elongation polymeric membrane, or silicon-coated isolation film, the lower surface covered by silicon-coated isolation film.
GB/T 35467-2017 《湿铺防水卷材》E类指标要求
GB 55030-2022 《建筑与市政防水通用规范》
Executive standard
GB/T 35467-2017 Wet installed waterproof sheets, specifications of type E
GB 55030-2022 General code for waterproofing of building and municipal engineering
1、强力交叉层压薄膜,具有高延伸率、高抗撕裂强度、高耐钉杆撕裂强度、尺寸稳定性好的特点;
2、耐高低温性能优异,优异的延伸性和抗拉性能,适应结构基层的变形;
3、卷材具有良好的“自愈”功能,可以自行修复基层发生的微小裂纹;
4、湿铺施工时,对于基层要求不高,不需要底涂,尤其适用于雨季较长、潮湿环境下的防水施工;
5、添加专用改性剂,在湿铺卷材施工时,改性沥青胶与水泥胶浆产生物理卯榫作用,同时可在水泥发生水化热的过程中产生化学交联,从而形成“皮肤式满粘”的效果;
6、施工过程无需动火,环保安全。
1. High density polyethylene (HDPE) strong cross-film has reliable dimensional stability, good performance of elongation and tear strength (nail shank).
2. Good temperature resistance is suitable for cold and hot regions, especially for cold area. High tensile strength and elongation can adapt to shrinkage deformation and cracking of the substratum.
3. The product self-healing function can availably repair tiny cracking of the substratum.
4. The wet-installation do not need the primer, especially is suitable for engineering with wet substratum because of wet season.
5. The modified bitumen using polymer modifier can produce physical mortise and tenon effect with cement grout and thermal reaction during cement solidification process, which is adhered to substratum fully and tightly.
6. Safety and environmentally friendly, the application of self-adhesive waterproof materials is simple and convenient, which can avoid open-flame working.
项目 |
标准要求 |
产品型号 |
E类 |
卷材长度 |
15m,20m |
卷材宽度 |
1m |
卷材厚度 |
1.5mm,2.0mm |
卷材面积 |
15㎡,20㎡ |
上表面隔离材料 |
强力交叉层压膜,涂硅隔离膜 |
下表面隔离材料 |
涂硅隔离膜 |
Items |
Standard requirements |
Products type |
Type E |
Length |
15m, 20m |
Width |
1m |
Thickness |
1.5mm, 2.0mm |
Area |
15m², 20m² |
Upper surface isolation material |
Strong cross-film, silicon-coated isolation film |
Lower surface isolation material |
Silicon-coated isolation film |
适用于工业与民用建筑的屋面和地下防水非外露工程,尤其适用于潮湿基层施工的工程。
Waterproofing for various roof and underground engineering of industrial, civil and municipal construction projects, especially for engineering with wet substratum because of wet season.
版权所有:远大洪雨(唐山)防水材料有限公司 Copyright © 2020, ydhyfs.com. All rights reserved 免责声明
编号:冀ICP备19036869号-2